Programmable Logic Controller - PLC
Project based Training Program:
A PROGRAMMABLE LOGIC CONTROLLER (PLC) is an industrial computer control system that continuously monitors the state of input devices and makes decisions based upon a custom program to control the state of output devices. Almost any production line, machine function, or process can be greatly enhanced using this type of control system.
The biggest benefit in using a PLC is the ability to change and replicate the operation or process while collecting and communicating vital information. The PLC are modular. So one can mix and match the types of Input and Output devices to best suit your application.
Modern PLCs can be programmed in a variety of ways, from the relay-derived ladder logic to programming languages such as specially adapted dialects of BASIC and C. Another method is state logic, a very high-level programming language designed to program PLCs based on state transition diagrams.
The PLCs used during the training at EmbLogic are Allen Bradley, Delta, Fatek, Mitsubishi and Seimens
Salient Features of Training Program:
Training Objective:
- This short course is designed to ensure that the trainees with academic Capabilities will have the skill set needed to deal with the challenges involved in real-world simulation and control using PLC to meet the needs of industries both today and in the future.
- The trainees should be able to develop logic and convert logic into algorithms and then to programs.
Training Topics in Brief:
-
Session:
- PLC Fundamentals,
- Basics of digital electronics,
- Introduction of different PLC's software's and features,
- Introduction of programming languages for PLC.
-
Labs:
- Introduction of Basic Programming Instruction and programming using Basic Instruction (2 labs)
- Introduction of timers and programming based on timers (2 labs)
- Introduction of counter and programming based on counter. (1 labs)
- Programming based on timers and counter. (3 labs)
- Introduction of memory , programming for arithmetic and logical operation ( 1 lab )
- Projects based programming ( 5 labs )
-
Session
- Introduction of Cables and Ports,
- PLC Hardware & Architecture,
- Sourcing & Sinking concepts,
- Concepts of wiring of PLC.
-
labs:
- Installation of software,
- wiring of PLC ,
- fault finding and trouble shooting.
Pre-requisite:
- Good IQ and Aptitude is required. Ability to use computer systems, general understanding about operating system concepts are assumed.
Agenda:
The Duration of Training would be:
- 24 working days.
-
There would be
- 2 Classroom Sessions of 2 hours each
- 15 Lab sessionsof 4 hours each
- 64 Hours of Training.
Training Methodology:
- Hands on approach to training, behaviorial model of training would be practiced.
- During the training, the Trainee would implement a projects related to respective modules.
- Comitment to Individual growth and constant evaluation.
- Implementation of programming techniques through a Project.
Deliverables:
After the training is over the trainee should be able to:
- Programming in different PLC.
- Programming for Single system.
- Programming for Industrial Process.
- Installation of Programming Software for Different PLC.
- Selection of cables and software’s for programming.
- Wiring of PLC.
- Selection of PLC according to panel.
- Will be able to operate PLC based Panels.
- Collection of data from the Field.
- Will be able to make a closed loop System.
-
EmbLogic would issue/provide the following
- Project Report for Submitting into their college.
- Project presentaation and demonstration assistance.
- Completed Project (by the trainee).
- Certificate of Completion for the training and Project as mentioned above.
About Programmable Logic Controllers - PLC: click here...
Training and Project Resources click here...
EmbLogic™ is an ISO 9001:2008(QMS) (Quality Management System) Certified Company.