#problem persist in this as i required some synchronize technique because when i run multiple application onto the single node then data is to be in mingle form......do required semphore in this.....
RCS file: application3.c,v
Working file: application3.c
head: 1.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1; selected revisions: 1
description:
making the third application.
----------------------------
revision 1.1
date: 2014/05/30 09:20:55; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: cleanup.c,v
Working file: cleanup.c
head: 1.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1; selected revisions: 1
description:
this is used to remove and unregistered the module from the /proc/devices table.
----------------------------
revision 1.1
date: 2014/05/24 07:13:18; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: devopen.c,v
Working file: devopen.c
head: 1.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1; selected revisions: 1
description:
open the module in the kernel layer by passing the argument from the application layer of the open system call.
here we are not using the trim funciton.
----------------------------
revision 1.1
date: 2014/05/24 07:15:18; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: devwrite.c,v
Working file: devwrite.c
head: 1.3
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 3; selected revisions: 3
description:
used to write in the multiple quantum
multiple qset
then use copy_from_user.
very important file and hard too.
----------------------------
revision 1.3
date: 2014/05/25 09:31:31; author: root; state: Exp; lines: +11 -4
use the loff and filep->f_pos to see the position of the pointer.
this loff and filep->f_pos could not be updated automatically so we make the updation.
----------------------------
revision 1.2
date: 2014/05/24 07:47:23; author: root; state: Exp; lines: +1 -1
*** empty log message ***
----------------------------
revision 1.1
date: 2014/05/24 07:17:56; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: header.h,v
Working file: header.h
head: 1.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1; selected revisions: 1
description:
define macros and include header file in this and make a ScullDev and ScullQset structure in this.
----------------------------
revision 1.1
date: 2014/05/24 07:11:00; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: prototype.h,v
Working file: prototype.h
head: 1.3
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 3; selected revisions: 3
description:
declare the prototype.
----------------------------
revision 1.3
date: 2014/05/25 11:29:17; author: root; state: Exp; lines: +1 -0
*** empty log message ***
----------------------------
revision 1.2
date: 2014/05/24 09:07:02; author: root; state: Exp; lines: +2 -0
mention the prototype of the read call which is is fs.h header file and is in the struct file_operations {
----------------------------
revision 1.1
date: 2014/05/24 07:14:52; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: application4.c,v
Working file: application4.c
head: 1.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1; selected revisions: 1
description:
making the fourth application.
----------------------------
revision 1.1
date: 2014/05/30 09:21:09; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: declaration.h,v
Working file: declaration.h
head: 1.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1; selected revisions: 1
description:
define some macros which are freq uently used in our program.
----------------------------
revision 1.1
date: 2014/05/24 07:14:06; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: devread.c,v
Working file: devread.c
head: 1.10
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 10; selected revisions: 10
description:
write the fuction for the read which is work in the kernel layer.
----------------------------
revision 1.10
date: 2014/05/30 07:09:09; author: root; state: Exp; lines: +13 -8
implement the SEEK_SET again.
and it work file
----------------------------
revision 1.9
date: 2014/05/26 11:19:45; author: root; state: Exp; lines: +28 -9
draw logic for the seek operation.
----------------------------
revision 1.8
date: 2014/05/24 11:40:26; author: root; state: Exp; lines: +9 -5
give the defination for the read function.
----------------------------
revision 1.7
date: 2014/05/24 10:34:09; author: root; state: Exp; lines: +7 -2
*** empty log message ***
----------------------------
revision 1.6
date: 2014/05/24 09:28:15; author: root; state: Exp; lines: +5 -5
*** empty log message ***
----------------------------
revision 1.5
date: 2014/05/24 09:26:24; author: root; state: Exp; lines: +7 -7
*** empty log message ***
----------------------------
revision 1.4
date: 2014/05/24 09:21:09; author: root; state: Exp; lines: +1 -1
*** empty log message ***
----------------------------
revision 1.3
date: 2014/05/24 09:19:17; author: root; state: Exp; lines: +1 -1
*** empty log message ***
----------------------------
revision 1.2
date: 2014/05/24 09:16:07; author: root; state: Exp; lines: +1 -0
make a access to the private data to the sculldev
----------------------------
revision 1.1
date: 2014/05/24 09:09:26; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: init.c,v
Working file: init.c
head: 1.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1; selected revisions: 1
description:
this is used to insert the module the register the module.
in this i dont use trim function.
----------------------------
revision 1.1
date: 2014/05/24 07:12:20; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: application2.c,v
Working file: application2.c
head: 1.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1; selected revisions: 1
description:
this is the application2.
here we are using the single node to exess the two application.
----------------------------
revision 1.1
date: 2014/05/30 07:55:15; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: application.c,v
Working file: application.c
head: 1.16
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 16; selected revisions: 16
description:
this is the application program in the user space
open write and close is used
----------------------------
revision 1.16
date: 2014/05/30 07:19:57; author: root; state: Exp; lines: +1 -1
*** empty log message ***
----------------------------
revision 1.15
date: 2014/05/30 07:09:07; author: root; state: Exp; lines: +2 -2
*** empty log message ***
----------------------------
revision 1.14
date: 2014/05/29 06:06:43; author: root; state: Exp; lines: +1 -1
*** empty log message ***
----------------------------
revision 1.13
date: 2014/05/29 06:05:10; author: root; state: Exp; lines: +1 -1
*** empty log message ***
----------------------------
revision 1.12
date: 2014/05/29 05:44:00; author: root; state: Exp; lines: +1 -1
*** empty log message ***
----------------------------
revision 1.11
date: 2014/05/29 05:43:01; author: root; state: Exp; lines: +1 -1
*** empty log message ***
----------------------------
revision 1.10
date: 2014/05/29 05:38:44; author: root; state: Exp; lines: +1 -1
*** empty log message ***
----------------------------
revision 1.9
date: 2014/05/29 05:37:02; author: root; state: Exp; lines: +2 -2
*** empty log message ***
----------------------------
revision 1.8
date: 2014/05/26 11:19:01; author: root; state: Exp; lines: +2 -2
seeking operation applied
apply SEEK_SET. and call lseek in application layer
----------------------------
revision 1.7
date: 2014/05/26 06:00:53; author: root; state: Exp; lines: +10 -4
not open the node in RDWR mode because the node either open in the WR mode or in RD mode because its tbecause if we make it fullduplex then data get mingle.
----------------------------
revision 1.6
date: 2014/05/25 11:29:25; author: root; state: Exp; lines: +11 -7
open the file in the O_RDWR mode then its capable to read and write from the files.
----------------------------
revision 1.5
date: 2014/05/24 11:49:01; author: root; state: Exp; lines: +9 -9
*** empty log message ***
----------------------------
revision 1.4
date: 2014/05/24 11:35:56; author: root; state: Exp; lines: +12 -12
close the fd for the writing then open it again in the read mode.
----------------------------
revision 1.3
date: 2014/05/24 09:07:54; author: root; state: Exp; lines: +16 -2
close the fd for the write operation(important to close the fd otherwise use lseek)
then open in the read mode then read
while using its file descriptor.
----------------------------
revision 1.2
date: 2014/05/24 07:49:26; author: root; state: Exp; lines: +1 -1
*** empty log message ***
----------------------------
revision 1.1
date: 2014/05/24 07:17:20; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: devlseek.c,v
Working file: devlseek.c
head: 1.2
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 2; selected revisions: 2
description:
----------------------------
revision 1.2
date: 2014/05/30 07:09:37; author: root; state: Exp; lines: +4 -2
*** empty log message ***
----------------------------
revision 1.1
date: 2014/05/25 11:30:12; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: devrelease.c,v
Working file: devrelease.c
head: 1.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1; selected revisions: 1
description:
for closeing the module
----------------------------
revision 1.1
date: 2014/05/24 07:16:45; author: root; state: Exp;
Initial revision
=============================================================================
RCS file: fileopr.h,v
Working file: fileopr.h
head: 1.3
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 3; selected revisions: 3
description:
used for the mapping purpose.
----------------------------
revision 1.3
date: 2014/05/25 11:30:20; author: root; state: Exp; lines: +2 -1
*** empty log message ***
----------------------------
revision 1.2
date: 2014/05/24 09:09:56; author: root; state: Exp; lines: +2 -1
do the mapping of read
----------------------------
revision 1.1
date: 2014/05/24 07:18:55; author: root; state: Exp;
Initial revision
=============================================================================
