Information commands

bdinfo – print Board Info structure
coninfo – print console devices and information
flinfo – print FLASH memory information
help – print online help
Memory commands

base – print or set address offset
crc32 – checksum calculation
cmp – memory compare
cp – memory copy
md – memory display
mm – memory modify (auto incrementing)
mtest – simple RAM test
mw – memory write (fill)
nm – memory modify (constant address)
loop – infinite loop on address range
Flash memory commands

cp – memory copy
flinfo – print FLASH memory information
erase – erase FLASH memory
protect – enable or disable FLASH write protection
Image commands

iminfo – print header information for application image
imxtract – extract a part of a multi-image
Execution control commands

autoscr – run script from memory
source – run script from memory
bootm – boot application image from memory
go – start application at address ‘addr’
loop – infinite loop on address range
exit – exit script
Download commands

bootp – boot image via network using BOOTP/TFTP protocol
dhcp – invoke DHCP client to obtain IP/boot params
loadb – load binary file over serial line (kermit mode)
loady – load binary file over serial line (ymodem mode)
loads – load S?Record file over serial line
rarpboot – boot image via network using RARP/TFTP protocol
tftpboot – boot image via network using TFTP protocol
nfs – boot image via network using NFS protocol
ping – send ICMP ECHO REQUEST to network host
Environment variables commands

env – environment handling commands
editenv – edit environment variable
printenv – print environment variables
saveenv – save environment variables to persistent storage
setenv – set environment variables
run – run commands in an environment variable
bootd – boot default, i.e., run ‘bootcmd’
boot – boot default, i.e., run ‘bootcmd’
File system support commands

fatinfo – print information about a FAT file system
fatload – load binary file from a FAT file system
fatls – list files in a FAT file system directory (default /)
ext2load – load binary file from a Ext2 filesystem
ext2ls – list files in a directory (default /)
fsinfo – print information about JFFS2 file system
fsload – load binary file from a JFFS2 file system image
ls – list files in a JFFS2 file system directory (default /)
NAND flash support

nand – NAND sub-system control
nandecc – switch OMAP3 NAND ECC calculation algorithm
nboot – boot from NAND device
Partition commands

mtdparts – define flash/nand partitions
chpart – change active partition
FDT support

fdt – flattened device tree utility commands
MMC support

mmc – MMC sub system
mmcinfo – display MMC information
I2C support

i2c – I2C sub-system control
USB support

usb – USB sub-system control
usbboot – boot from USB device
Cache support

icache – enable or disable instruction cache
dcache – enable or disable data cache
Bitmap support

bmp – manipulate BMP image data
GPIO support

gpio – manipulate gpios
Miscellaneous commands

echo – echo arguments to console
reset – Perform RESET of the CPU
sleep – delay execution for some time
version – print monitor version
test – minimal test, like /bin/bash
? – alias for help
showvar – print local hushshell variables
true – do nothing, successfully
false – do nothing, unsuccessfully
cls – clear screen
itest – return true/false on integer compare