We are unable to connect wi-fi through fedora 15 and fedora 10 …………..
(12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g LP-PHY (rev 01))
We are unable to connect wi-fi through fedora 15 and fedora 10 …………..
(12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g LP-PHY (rev 01))
same issue fedora 16
Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
For Atheros AR9285 Wireless, run this command.
[root]#yum install linux-backports-modules-jaunty
[root]# wget http://www.orbit-lab.org/kernel/compat-wireless-2.6-stable/v2.6.36/compat-wireless-2.6.36-4.tar.bz2
[root]#tar -xvjf compat-wireless-2.6.36-4.tar.bz2
[root]#cd compat-wireless-2.6.36-4
[root]# make
[root]#make install
Restart the system.ANd you wireless will work now.
sir i am tried your command but give this error
compilation terminated.
make[3]: *** [/compat-wireless-2.6.36-4/drivers/bluetooth/dtl1_cs.o] Error 1
make[2]: *** [/compat-wireless-2.6.36-4/drivers/bluetooth] Error 2
make[1]: *** [_module_/compat-wireless-2.6.36-4] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.38.6-26.rc1.fc15.i686.PAE’
make: *** [modules] Error 2
my network controller is : Atheros Communications Inc. Device 0032 (rev ff)
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
pleas give me command for running wi-fi
06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
For Broadcom BCM4301 BCM4303 BCM4306 BCM4309
BCM4311 BCM4312 BCM4318
Install b43-fwcutter. This is the software package that does the extraction of the firmware from the proprietary driver.
Code:
[root]#su
[root]yum install b43-fwcutter
Determine which native driver is being used by the wireless card (b43 or b43legacy). The kernel is generally good about detecting a Broadcom wireless card and loading the correct driver module for it. The following terminal command will list the loaded kernel modules in alphabetical order. Look for b43 or b43legacy.
Code:
[root]#lsmod | sort
Do this step only if you need to install version 4 firmware for the b43 driver module. Copy and execute the following command lines one after the other in a Fedora terminal.
Code:
[root]#wget http://downloads.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2
[root]#tar xjf broadcom-wl-4.150.10.5.tar.bz2
[root]#cd broadcom-wl-4.150.10.5/driver
[root]su
[root]b43-fwcutter -w /lib/firmware wl_apsta_mimo.o
not working
same issue fedora 15_32
Network controller: Atheros Communications Inc. Device 0032) (rev ff)
Ethernet controller: Atheros Communications Device 1090(rev 10)
not working ethernet & wi-fi
For Broadcom BCM4311 BCM4312 BCM4313 BCM4321
BCM4322 BCM43224 BCM43225 BCM43227 BCM43228
BCM4328 BCM43XG
1) Install the RPM Fusion repositories.
To enable access to both the free and the nonfree repository use the following command:
For Fedora 15, 16 and 17:
[root]#su -c ‘yum localinstall –nogpgcheck http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm‘
2)Do this step only if you need to install the kmod version of the driver for the i686 or x86_64 kernels.
[root]#yum install kmod-wl
while entering the command:
[root]# yum install b43-fwcutter
i am getting an error:
Cannot retrieve repository metadata (repomd.xml) for repository: fedora.
Are you connected to internet. For this to work You should be connected to an internet connection.
I have installed Fedora 16 on my Dell Laptop studio 1558. The wireless isn’t working.
I used the lspci command to view my Ethernet controller :
09:00.0 Ethernet controller: Realtek Semiconductor Co. Ltd., RTL8111/8168B PCI E
My Network Adapter:
DW1520 Wireless-N WLAN Half-Mini Card.
Please suggest what steps should i take to get my wifi working.
After executing the command:
[root]#su -c ‘yum localinstall –nogpgcheck http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm‘
it gives an error:
Command line error: no such option: -n
successfully installed… wireless working fine… Thankx…
After executing the command:
[root]#su -c ‘yum localinstall –nogpgcheck http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm‘
it gives an error:
Command line error: no such option: -n
Correction:
[root]#su -c ‘yum localinstall _nogpgcheck http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm‘
error installing the wifi driver again.
As soon as i enter the above mentioned command the terminal shows:
Setting up Local Package Process
Skipping: _nogpgcheck, filename does not end in .rpm.
rpmfusion-free-release-stable.noarch.rpm | 17 kB 00:00
Examining /var/tmp/yum-root-xihq_o/rpmfusion-free-release-stable.noarch.rpm: rpmfusion-free-release-15-5.noarch
/var/tmp/yum-root-xihq_o/rpmfusion-free-release-stable.noarch.rpm: does not update installed package.
Cannot open: http://download1.rpmfusion.org/nonfree/rpmfusion-nonfree-release-stable.noarch.rpm. Skipping.
Nothing to do